Stylus C40UX/C40SX/C20UX/C20SX | Revision A |
5.1.11 Refurbishment for DOA
If you clean the cavity of the printhead and cap assembly, this function will be useful.
After carry out this function, replace the waste drain ink pad
CAUTION | with new one and reset the Waste drain ink pad counter. |
| |
| Otherwise, the ink or S46 liquid may leak from the pad during |
| the transportation. |
Prepare the following tool.
*Dummy ink cartridge, Injector, S46 liquid
Do not carry out this program repeatedly. This operation is available only one time. Excessive operation causes overflow of the ink and S46 liquid.
When you refurbish the repair product by using this program, do it on your responsibility.
When you charge S46 liquid into the dummy ink cartridge with the Injector, make sure fill out the dummy ink cartridge with S46 liquid. In case enough S46 liquid is not charged into the dummy cartridge, the printhead will not cleaned and not filled with the S46 liquid enough in this operation.
Keep the S46 liquid and the dummy ink cartridge clean.
1.Choose the “Refurbishment for DOA” in the Maintenance menu.
Figure 5-21. Choose the Refurbishment for DOA menu
2.Set the dummy cartridge in the printer using the ink replacement function.
3.Select “Yes” under “Item,” then click the “OK” button. The “Refurbishment for DOA” function is then executed.
Adjustment | Overview | 87 |
