Stylus C40UX/C40SX/C20UX/C20SX | Revision A |
WARNING | Avant de commencer, assurez vous que l’imprimante soit eteinte |
| et que le cordon d’alimentation soit debranche. |
Lorsque vous changez la pile au lithium, assurez vous que la nouvelle respecte bien les caracteristiques requises.
Lorque que vous installez la pile au lithium, faites attention a l’inserer dans le bon sens en respectant la polarite.
Veillez a jeter les piles usagees selon le reglement local.
Ne rechargez pas les piles au lithium.
CAUTION Risque d’explosion si la pile est remplacée incorrectment. Ne remplacer que par une pile du même type ou d’un type équivalent
recommandé par le fabricant. Eliminer les piles déchargées selon les lois et les règles de sécurité en vigueur.
WARNING When working on the FUSER ASSY or nearby parts, be sure to wait until the temperature of the parts cool down to a safe level.
Wait at least 40 minutes before you start working on the printer.
Do not expose yourself to the laser beam to prevent injury (blindness).
Understand how the laser beam functions and take maximum precautions not to injure yourself or anyone around you.
CAUTION
Never remove the ink cartridge from the carriage unless this manual specifies to do so.
When transporting the printer after installing the ink cartridge, be sure to pack the printer for transportation without removing the ink cartridge.
Use only recommended tools for disassembling, assembling or adjusting the printer.
Observe the specified torque when tightening screws.
Apply lubricants and adhesives as specified. (See Chapter 6 for details.)
Make the specified adjustments when you disassemble the printer.
(See Chapter 5 for details.)
When assembling, if an ink cartridge is removed and needs to be installed again, be sure to install a new ink cartridge because of the following reasons;
1.Once the ink cartridge mounted on the printer is removed, air comes in and creates bubbles in the cartridge. These bubbles clog ink path and cause printing malfunction.
2.If an ink cartridge in use is removed and is reinstalled, ink quantity will not be detected correctly since the counter to check ink consumption is cleared.
Because of the reasons above, make sure to return the printer to the user with a new ink cartridge installed.
Disassembly and Assembly | Overview | 58 |
