Setup & Operation 1. Safety

1.6 Manipulator Labels

The following labels are attached near the locations of the Manipulator where specific dangers exist.

Be sure to comply with descriptions and warnings on the labels to operate and maintain the Manipulator safely.

Do not tear, damage, or remove the labels. Use meticulous care when handling those parts or units to which the following labels are attached as well as the nearby areas:

 

 

 

 

Labels

 

 

NOTE

 

 

 

 

 

 

 

 

Before loosening the base mounting

A

 

 

 

 

 

 

 

screws, hold the arm and secure it tightly

 

 

 

with a band to prevent hands or fingers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

from being caught in the Manipulator.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hazardous voltage exists while the

C

 

 

 

 

 

 

 

Manipulator is ON. To avoid electric

 

 

 

shock, do not touch any internal electric

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

parts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can catch your hand or fingers

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

between the shaft and cover when

 

 

 

 

 

 

 

 

bringing your hand close to moving parts.

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

HOT

 

 

 

 

 

 

 

 

 

 

 

 

Be careful not to burn yourself.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

G3 Rev.1

Page 18
Image 18
Epson G3 Series manual Manipulator Labels, Be careful not to burn yourself