Epson S5U1C63000A cmw, (1), (2), >cmw↵, (guidance mode), >cmw <file name>↵, (direct input mode), File name ? <file name>↵, cmw (execute command file with wait)

CHAPTER 8: DEBUGGER

cmw (execute command file with wait)

Function

This command reads a command file and executes the debug commands written in that file at predetermined time intervals.

The execution interval of each command can be set in a range of 1 to 256 seconds (in 1-second incre- ments) using the md command. In the initial debugger settings, the execution interval is 1 second.

	Format
(1)		>cmw <file name>↵	(direct input mode)
(2)		>cmw↵	(guidance mode)
		File name ? <file name>↵

>(Display execution progress)

<file name>: Command file name (path can also be specified)

Examples

Format (1)

>cmw batch1.cmd↵

>.....

Format (2)
>cmw↵	? test.cmd↵
File name
>.....

Notes

•Any contents other than commands cannot be written in the command file.

•An error results if the file you specified does not exist.

Error : Cannot open file

•Another command file can be read from a command file. However, the nesting of command files is limited to a maximum of 5 levels. An error results if a cmw (or com) command at the sixth level is encountered, the commands in the file specified by that cmw (or com) command will not be executed, but the subsequent execution of the commands in upper level files will be executed continuously.

Error : Maximum nesting level(5) is exceeded, cannot open file

•If the cmw command is written in the command file that you want to be read by the com command, all other commands following that command in the file (even when a com command is included) will be executed at predetermined time intervals.

•Use the hot key ([CTRL]+[Q]) to stop executing a command file.

GUI utility

None

However, the same function as the cmw can be executed using [Command File...] in the [Run] menu (see the com command).

S5U1C63000A MANUAL	EPSON	225
(S1C63 FAMILY ASSEMBLER PACKAGE)