Epson S5U1C63000A xdp/xdps, for sub FPGA, for main FPGA, (direct input mode), (direct input mode), >xdp <address1> [<address2>]↵, >xdps <address1> [<address2>]↵

CHAPTER 8: DEBUGGER

xdp/xdps (xilinx fpga data dump)

Function

This command displays the content of the FPGA on the standard peripheral circuit board to the [Command] window in a 16 words/line hexadecimal dump format.

Format
>xdp <address1> [<address2>]↵	for main FPGA	(direct input mode)
>xdps <address1> [<address2>]↵	for sub FPGA	(direct input mode)
<address1>: Start address to display; hexadecimal
<address2>: End address to display; hexadecimal
Condition: 0 ≤ address1 ≤ address2 ≤	FPGA end address

Examples

If only <address1> is defined, the debugger displays data for 256 words from <address1>.

>xdp 0↵
Addr	+0	+1	+2	+3	+4	+5	+6	+7	+8	+9	+A +B +C +D +E +F
00000: FF 84 AB EF F9 D8 FF BB									FB BB BF FB BF BF FB BF
00010: BB FB BB BF BB BF FB BB									BF BF FB BB FF EE FF EE
00020: EF FE D7				FB FE EE EF EF					EE EE FE EE FB FE EF EF
:					:						:
000E0: FF FF FF FF FB FF FF FF									BD DF FB FD DF FF FF FF
000F0: FF FF BF FF FF FF FF F9									FF FF FF FF FF FF FF FF
>

If both <address1> and <address2> are defined, the debugger displays data from <address1> to <address2>.

>xdp 100 100↵

Addr +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F 00100: FF

>

Notes

•An error results if the specified address is not a hexadecimal number.

Error : invalid value

•An error results if the start address is larger than the end address.

Error : end address < start address

GUI utility

None

S5U1C63000A MANUAL	EPSON	235
(S1C63 FAMILY ASSEMBLER PACKAGE)