INTRODUCTION

Manual Notations

This manual was prepared by following the notation rules detailed below:

(1)Sample screens

The sample screens provided in the manual are all examples of displays under Windows®95/98. These displays may vary according to the system or fonts used.

(2)Names of each part

The names or designations of the windows, menus and menu commands, buttons, dialog boxes, and keys are annotated in brackets [ ]. Examples: [Command] window, [File Exit] menu item ([Exit] command in [File] menu), [Key Break] button, [q] key, etc.

(3)Names of instructions and commands

The CPU instructions and the debugger commands that can be written in either uppercase or lower- case characters are annotated in lowercase characters in this manual, except for user-specified sym- bols.

(4)Notation of numeric values

Numeric values are described as follows:

Decimal numbers: Not accompanied by any prefix or suffix (e. g., 123, 1000).

Hexadecimal numbers: Accompanied by the prefix "0x" (e. g., 0x0110, 0xffff).

Binary numbers: Accompanied by the prefix "0b" (e. g., 0b0001, 0b10).

However, please note that some sample displays may indicate hexadecimal or binary numbers not accompanied by any symbol. Moreover, a hexadecimal number may be expressed as xxxxh, or a binary number as xxxxb, for reasons of convenience of explanation.

(5)Mouse operations

To click: The operation of pressing the left mouse button once, with the cursor (pointer) placed in the intended location, is expressed as "to click". The clicking operation of the right mouse button is expressed as "to right-click".

To double-click:Operations of pressing the left mouse button twice in a row, with the cursor (pointer) placed in the intended location, are all expressed as "to double-click".

To drag: The operation of clicking on a file (icon) with the left mouse button and holding it down while moving the icon to another location on the screen is expressed as "to drag".

To select: The operation of selecting a menu command by clicking is expressed as "to select".

(6)Key operations

The operation of pressing a specific key is expressed as "to enter a key" or "to press a key".

A combination of keys using "+", such as [Ctrl]+[C] keys, denotes the operation of pressing the [C] key

while the [Ctrl] key is held down. Sample entries through the keyboard are not indicated in [ ]. Moreover, the operation of pressing the [Enter] key in sample entries is represented by "↵ ".

In this manual, all the operations that can be executed with the mouse are described only as mouse operations. For operating procedures executed through the keyboard, refer to the Windows manual or help screens.

(7)General forms of commands, startup options, and messages

Items given in [ ] are those to be selected by the user, and they will work without any key entry involved.

An annotation enclosed in < > indicates that a specific name should be placed here. For example, <file name> needs to be replaced with an actual file name.

Items enclosed in { } and separated with indicate that you should choose an item. For example, {A B} needs to have either A or B selected.

(8)Development tool name

ICE: Indicates S5U1C63000H1 (S1C63 Family In-Circuit Emulator).

ii

EPSON

S5U1C63000A MANUAL

 

 

(S1C63 FAMILY ASSEMBLER PACKAGE)