CHAPTER 3: WORK BENCH

[Find Next] button

Clicking this button starts searching the specified word. If the specified word is found, the [Edit] window refreshes the display and highlights the word found.

[Replace] button

By clicking this button after the specified word is found, it is replaced with the substitute word. Then the work bench searches the next.

[Replace All] button

Replaces all the specified found words with the substitute word. Note that undo function cannot be performed for this operation except for the last replaced word.

[Cancel] button

Clicking this button closes the dialog box.

Go to

You can go to any source line or any label position quickly.

To do this, select [Go To] from the [Edit] menu.

The [Go To] dialog box appears.

Going to a source line

1.Select "Line" in the [Go to what:] list box.

2.Type a line number in the [Enter Line Number] box and then click the [Go To] button.

Going to a label position

1.Select "Label" in the [Go to what:] list box.

The [Enter Line Number] box changes to the [Select Label] list box.

2. Select a label from the [Select Label] box and then click the [Go To] button.

The [Select Label] list box has a pull-down menu that contains the list of labels defined in the current source file.

The [Edit] windows for source files (*.s, *.ms) have the [Go To Label] list box similar to the [Select Label] list box in the [Go To] dialog box. You can also go to a label position using this box.

Inserting a file

To insert a file such as a header file and another source at the cursor position of the current source, select [File...] from the [Insert] menu.

A dialog box will appears allowing selection of the file to be inserted.

34

EPSON

S5U1C63000A MANUAL

 

 

(S1C63 FAMILY ASSEMBLER PACKAGE)