CHAPTER 3: WORK BENCH

3.9.3 Debugger Options

[COM Port:] list box

Select a COM port of the personal computer used to communicate with the ICE. COM1 is set by default.

[bps:] list box

Select a baud rate to communicate with the ICE. 9600 bps is set by default.

[Initial Command:] edit box

This box is used to edit the debugger commands to be executed when the debugger starts up. The work bench generates a command file with the commands entered in this box and specifies it when invoking the debugger. A load command is initially set so that the debugger can load the object at start up.

Refer to Chapter 8, "Debugger", for details of the debugger options.

3.9.4 HEX Converter Options

[Output Format:] list box

An output format of the executable object to be generated by the build task can be selected.

When "Absolute Object" is selected, the build task will be terminated after linking has completed. The HEX converter will not be invoked. When "Intel Hex" or "Motorola S" is selected, the HEX converter will be invoked after linking has completed. Other HEX converter options become selectable when one of them is selected.

[Do not fill room with 0xFF] check box

Select this option when not filling the unused program area with 0xFF.

[Output error log file] check box

Select this option to generate the error log file of the HEX converter.

Refer to Chapter 6, "HEX Converter", for details of the HEX converter options.

S5U1C63000A MANUAL

EPSON

43

(S1C63 FAMILY ASSEMBLER PACKAGE)