Chapter 2
2.3.3Installing Cables - Safety
Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cables at plugs, convenience receptacles, and the point where they exit from the appliance.
Do not run AC power cables in the same duct as signal leads. Do not move or install equipment whilst it is still attached to the mains supply. Ensure safety and ESD precautions are observed whilst
2.4EMC Compliance Statements1
2.4.1EN 55022/AS/NZS 3548
This is a Class A product. In a domestic environment this product may cause radio interference in which case the User may be required to take adequate measures.
2.4.2FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Reference Guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the User will be required to correct the interference at ones own expense.
2.5AC Supply Operating Voltage and Fusing – Safety Information
2.5.1AC Power Supply
The equipment operates from an
1The EMC information was correct at the time of manufacture.
EN/LZT 790 0005 R1A |