External Control Commands
mpgPlay
This command plays a previously loaded MPEG file on the specified channel. The file must have already been loaded using the mpgLoad command.
Syntax
mpgPlay 0 channel
Parameters
channel
The channel on the Firefly (0)
Return Values
This command returns ACK if playback was started successfully, or NAK if playback could not be started (e.g., no file previously loaded).
mpgStop
This command stops playback of an MPEG file that is currently playing on the specified channel.
Syntax
mpgStop 0 channel
Parameters
channel
The channel on the Firefly (0)
Return Values
This command returns ACK if playback was stopped successfully, or NAK if playback could not be stopped (e.g., no file currently playing).
126