FOCUS Enhancements 3.2 user manual Audio Settings, Settings-Audio

WEBVIEW

Audio Settings

Figure 30. Settings-Audio

Volume

This setting allows you to set the volume level for audio played back on the Firefly. The default volume setting is 10 on the 0-20 scale.

Audio Output

Firefly gives you several audio output options depending on the configuration you use (see Table 3 on page 74). Standard MPEG layer-2 files will output from both the digital and stereo analog outputs. Dolby Digital (AC3) files will output from the digital outputs only. However, by upgrading your unit/s. you can “mix down” AC3 files to the stereo analog outputs. If your application requires a 2-channel (stereo) mix of AC3, please contact a Visual Circuits representative for more information.

73