WEBVIEW
Use a solid background (one color) in your graphic overlays for the Auto key feature to work properly.
Entering your own RGB values for the key color feature only works with 8 bit bitmap graphics less than or equal to 720x480 resolution.
5.If desired, adjust the rate (in seconds) at which you would like the graphic overlay to fade in and/or out on the screen.
6.If desired, select the position on the screen where you would like to have the graphic overlay located (example: left bottom).
7.If desired, use the check boxes on the right side of the screen. The check boxes correspond to each of the graphic overlay properties. These check boxes can be used to copy the properties in their associated frames to all of the existing graphic overlays across all channels in a playlist. For example, if you would like ensure that all existing graphic overlays for a given playlist always appear in the lower right corner, then you would set the screen position attribute to right bottom and would check the “Apply to All” box to the right of that frame. If, for example, you would like to have the same graphic overlay with all of the same properties applied to all of the videos in a given playlist, you would check each of the “Apply to All” boxes to the right of the option frames (Overlay Filename, Transparency, Key Color, Fade In/Out and Position on Screen).
8.Click the OK button to save your changes and to return to the Playlist Editor screen.
41
