Fujitsu MCM3130SS, MCP3064SS, MCM3064SS, MCP3130SS manual Tables

Contents

TABLES

Table 2.1	Representative model names and order numbers	2-1
Table 2.2	Specifications	2-2
Table 2.3	Environmental and power requirements	2-4
Table 2.4	Recommended optical disk cartridges	2-7
Table 2.5	Disk specifications	2-10
Table 3.1	Temperature requirements at measurement points	3-2
Table 3.2	Temperatures at measuring points (Reference)	3-3
Table 3.3	Recommended components for connection	3-20
Table 3.4	External operator panel interface	3-22
Table 3.5	Device type mode setting	3-23
Table 3.6	Write verify mode setting	3-23
Table 3.7 Logical specification type setting		3-24
Table 4.1	SCSI ID setting (SW1)	4-8
Table 4.2	SCSI data bus parity checking (SW1)	4-8
Table 4.3	Write cache mode setting	4-9
Table 4.4	Device type mode settings	4-9
Table 4.5	Spindle automatic stop mode setting	4-10
Table 4.6	SCSI terminating resistor power supply (CNH1)	4-10
Table 4.7	SCSI terminating resistor mode (CNH1)	4-11
Table 4.8	Setting checklist	4-12
Table 5.1	Head cleaner	5-5
Table 5.2	Cleaning kit	5-10
Table 5.3 Packing list for cleaning kit		5-10
Table 6.1	Diagnostics function	6-1
Table 7.1 INFORMATION TRANSFER phase identification		7-5
Table 7.2	Interface cable requirements	7-9
Table 7.3	Requirements for terminating resistor power supply	7-12
Table 7.4	Signal status	7-13
Table 7.5	Signal driving method	7-13
Table 7.6	Bus phases and signal sources	7-14
Table 7.7	Timing specifications	7-15
Table 7.8	SCSI BUS Timing specifications	7-17
Table 7.9	Parameters used for synchronous data transfer	7-35
Table 7.10	Setting value of SCSI time monitoring	7-39

C156-E228-02EN xv