Fujitsu MCM3064SS, MCP3064SS, MCP3130SS manual Illustrations, Algorithms for alternate processing

Contents

Illustrations

FIGURES

Figure 1.1	The optical disk drive (with panel)	1-6
Figure 1.2	The optical disk drive (without panel)	1-6
Figure 1.3	Configuration of optical disk drive	1-7
Figure 1.4	Block diagram of the control circuit section	1-9
Figure 2.1	Optical disk cartridge	2-8
Figure 2.2	Algorithms for alternate processing	2-11
Figure 2.3	Example of alternate processing	2-12
Figure 3.1	Surface temperature measurement point	3-1
Figure 3.2	Outer dimensions	3-5
Figure 3.3	Outer dimensions	3-7
Figure 3.4	Installation directions	3-10
Figure 3.5	Center of gravity	3-11
Figure 3.6	Mounting frame structure	3-12
Figure 3.7	Service areas	3-13
Figure 3.8	MCM3130SS current waveform (+5 VDC)	3-14
Figure 3.9	Power on/off sequence (1)	3-15
Figure 3.10	Power on/off sequence (2)	3-15
Figure 3.11	Power on/off sequence (3)	3-15
Figure 3.12	AC noise filter (recommended)	3-16
Figure 3.13	Connector and terminal locations	3-17
Figure 3.14	Power supply connector	3-18
Figure 3.15	Cable connection mode	3-19
Figure 3.16	External operator panel circuit example	3-21
Figure 3.17	External operator panel interface connector	3-22
Figure 4.1	Individual packaging style	4-3
Figure 4.2	Gathered packaging style	4-3
Figure 4.3	SCSI bus connection modes	4-4
Figure 4.4	Positions of setting terminals and switches	4-6
Figure 4.5	Setting switch (SW1)	4-7
Figure 4.6	SCSI connection check	4-16
Figure 5.1	Optical disk drive front view (with panel)	5-1

C156-E228-02EN xiii