CHAPTER 3 Installation Requirements

3.1Environmental Requirements

3.2Mounting Requirements

3.3Power supply Requirements

3.4Connection Requirement

This chapter describes environmental, mounting, power supply, and connection requirements.

3.1 Environmental Requirements

The optical disk drive must be installed in an environment complying with the ambient environmental requirements defined in Section 2.1.3.

3.1.1 Temperature measurement points

While the drive is operating, the ambient temperatures measured 3 cm away from the surfaces of the optical disk drive must satisfy the ambient environmental requirements specified in Section 2.1.3. As for the surface temperatures during operation, the contact temperatures measured at the points shown in Figure 3.1 must satisfy the temperature requirements specified in Section 3.1.2.

(a) Inside optical disk cartridge

Opening of disk outer wall

Hole for inserting thermocouple

Tip of thermocouple

Figure 3.1 Surface temperature measurement point (1 of 2)

C156-E228-02EN

3-1

Page 43
Image 43
Fujitsu MCM3130SS, MCP3064SS manual Installation Requirements, Environmental Requirements, Temperature measurement points