Fujitsu N1800, PA03609-B005 Press the [OK] button, 4.Press the [OK] button, 4.6.2 Adjusting the Scan Starting Position (Offset/Magnification)

4.6.2 Adjusting the Scan Starting Position (Offset/Magnification)

Usually, it is not necessary to make any setting changes.

Configure the following setting items.

zOffset settings

When the scanned output is found to be displaced relative to the actual documents being scanned, the scan offsets can be adjusted.

zLength magnification setting

If the scanned output is found to be vertically distorted (stretched or squashed) relative to the actual documents being scanned, the length magnification in the vertical scanning direction can be adjusted.

1.Select [System Settings] J [Scanner Settings] J [Scanner Adjustment].

D The [Scanner Adjustment] window appears.

2.Enter a magnification value for the vertical offset in the [Length Magnification] input field.

3.Enter a value for horizontal offset in the [Horizontal Offset] field. Enter a value for vertical offset in the [Vertical Offset] field.

4.Press the [OK] button.

DThe offset and length magnification settings are set.

105