Fujitsu N1800, PA03609-B005 Select the [Request, Select [Monitoring & Management], Select [Monitoring & Management], ■Checking for Updates at Scanner Startup

4.16 Maintaining the System

■Checking for Updates at Scanner Startup

You can set the function for automatically checking for updates each time the scanner is started.

1.Select [Monitoring & Management] J [Maintenance] J [System Update].

D The [System Update] window appears.

2.Select the [Check for updates at scanner startup.] check box.■Requesting e-Mail Notification When a New Update is Available

The administrator can set to receive an e-mail notification if a new update is released.

1.Select [Monitoring & Management] J [Maintenance] J [System Update].

D The [System Update] window appears.

2.Select the [Check for updates at scanner startup.] check box.

3.Select the [Request e-mail notification when a new update is released] check box.

D When a new update is released, an e-mail entitled "Event notification from ScanSnap N1800 Scanner_Name" is sent to the e-mail address that is set in the [Alert Notification] window. For details about the e-mail address settings for alert notification, refer to "4.16.6 Setting the Destination for Alert Notifications" (page 194).

188