Fujitsu N1800, PA03609-B005 6.6.1 Scaling, 2.Select the print scale of the scanned data, 1.On the [Print] window, press the [Scaling] button

6.6.1 Scaling

Set the print size for the scanned data.

The setting selected here will be used every time the user prints a document.

1.On the [Print] window, press the [Scaling] button.

D The [Scaling] window appears.

2.Select the print scale of the scanned data.

Printing results will vary as shown below, depending on the positioning setting. For more details on the positioning setting, refer to "6.6.2 Positioning" (page 341).

zShrink to Fit

The image is reduced so that the entire image fits into the area available for printing (area inside the dotted line). Further enlargement is not possible.

z If the positioning setting is [Center], the control point for printing is the center point of the area available for printing.

z If the positioning setting is [Top Left], the control point for printing is the top left corner of the area available for printing.

Center Top Left

Control Point

	Control Point
Available Area		Available Area
for Printing		for Printing

337