Fujitsu N1800, PA03609-B005 6.9.3 Paper Size, 3.Select a paper size, 2.Press the [Paper Size] button, On the [Scan Settings] window, select the [Basic] tab

6.9 Setting the Scan Options

6.9.3 Paper Size

Set a paper size for the document to be scanned.

1.On the [Scan Settings] window, select the [Basic] tab.

2.Press the [Paper Size] button.

DThe [Paper Size] window appears.

3.Select a paper size.

DThis returns you to the [Scan Settings] window. The selected size is displayed to the right of the [Paper Size] button.

When the [Auto] setting is used, the paper size is set to the same size (Maximum: 215.9 × 355.6 mm/8.5 × 14 in.) as the actual document being scanned.

However, if using any of the following types of documents, the automatic paper size detection may not function correctly:

zPaper of weight less than 52 g/m2 (14 lb)

zDocuments that are not rectangular

zDocuments of a longer length than legal size

zIf a paper size other than [Auto] is selected and only one side of the documents is scanned, artwork on the reverse side of the paper may bleed through onto the front side scan. If this happens, blank pages may not be recognized as such, and thus may not be skipped by the [Skip Blank Page] function. For more details, refer to "6.9.17 Blank Page Skip" (page 388).

zWhen the [Custom] button is selected, any paper size for the scanned data can be specified on the [Custom] window.

If the paper height is 355.6 mm (14 in.) or longer, the paper size setting must be set to allow long pages. For details, refer to "Long Page Mode" (page 365).

364