Fujitsu N1800, PA03609-B005 2.Press the [Multifeed Setup] button, 6.9.19 Multifeed Detection (Layer and Length), On the [Scan Settings] window, select the [Advanced] tab

6.9 Setting the Scan Options

6.9.19 Multifeed Detection (Layer and Length)

"Multifeed" is an error that occurs when two or more sheets are fed simultaneously into the ADF. The scanner can be set to detect multifeeds and stop the scan with an error message.

Multifeeds are to be detected by layer and length. The following explains how to set whether or not multifeeds are to be detected, and setup multifeed detection method. For multifeed requirements, refer to "A.5 Multifeed Detection Conditions" (page 478).

1.On the [Scan Settings] window, select the [Advanced] tab.

2.Press the [Multifeed Setup] button.

DThe [Multifeed Setup] window appears.

3.If multifeeds are to be detected, select which detection method is to be used.

zAn error will occur if the [Length] or [Both] multifeed setting is used with the [Auto] paper size, and the document bundle being scanned contains different size pages.

zWhen a multifeed is detected with [Ultrasonic], you can choose to ignore the multifeed and continue scanning by pressing the [Retry] button on the error message window.

DThis returns you to the [Scan Settings] window. The selected setting is displayed to the right of the [Multifeed Setup] button.

392