This is driver code in Turbo C/C++, which can be used to communicate with the Micro PLC. This file should generally be included in other C files that perform the data acquisition.
This is source code which shows a simple application of the MCROCOMM.C driver written in Turbo C.
The executable form of the DEMO1.C file. Try this as is before modifying and recompiling.
This is a simple BAT file to compile the DEMO1.C file under Turbo C. You may need to modify the TCC command line to account for differences in your hard drive and compiler file locations.
This is source code for a more complicated application. This file also ªincludesº MCROCOMM.C at compile time.
This is the executable file for MICROBAR.C. Try this before making changes, and recompiling.
This batch file compiles MICROBAR.C. It has two command line switches. Print out the file to see. The TCC command line may need to be modified to account for your hard drive and compiler file locations.
These files are used by the COMPBAR.BAT file.
This is a video driver for EGA and VGA modes. This is used by the COMPBAR batch file during compilation.
B |
Communications Files
The programming software diskette contains the following communications drivers and demonstration programs. If you used the automated install routine for the Programming software, these files were placed in the \comm subdirectory under the main/microdirectory.
These files are provided ªas isº. Please do not call for technical support on these files.
MCROCOMM.C
DEMO1.C
DEMO1.EXE
COMPILE1.BAT
MICROBAR.C
MICROBAR.EXE
COMPBAR.BAT
OPT??.RES
EGAVGA.OBJ
Micro PLC Programmer's Guide ± Aptil 1994 |