Genicom LA36 manual Levers and Buttons Used for Paper Handling

					Paper Handling
Levers and Buttons Used for Paper Handling
	Lever/Button		Purpose	Action
	FF/LOAD		Form feed	Press FF/Load to execute a form feed.
				Continuous forms are fed forward by one
				page. Single sheets are ejected.
			Load paper	Press FF/Load to feed paper to the top of
				form position.
	LF		Line feed	Press LF to feed paper forward by one line.
	Park		Unload forms	Press Park to retract continuous forms to
				the “park position.”
	Set-Up/Quit + Top		Enter Top-of-Form	Press Set-Up/Quitand Top at the same time
			(TOF) Adjustment	to enter TOF Adjustment mode where the
			mode	paper loading position can be adjusted.
			Increase TOF value by	Press the	button to feed paper forward
			1/60 inch	by 1/60 inch in TOF Adjustment mode.
			Decrease TOF value by	Press the	button to feed paper backward
			1/60 inch	by 1/60 inch in TOF Adjustment mode.
		Exit/Save	Save TOF value	Press Exit/Save to permanently store the
				TOF position adjusted by the button and
				the button in TOF Adjustment mode.

Pause	Advance forms to the
	tear bar when forms are
	at the Top-of-Form
	(TOF) position..

Press Pause to advance the forms perforation to the tear bar. Tear off the forms, then press Pause again to return the forms to the previous position.

Paper select lever *	Select paper path	Move the paper select lever forward for
		single sheets.
		Move the paper select lever backward for
		continuous forms.
Paper thickness lever	Adjust for paper	Select the number corresponding to the
	thickness or number of	number of copies (including the original).
	copies	Vary the setting upward or downward
		(including A to D) to optimize printing.
		Select D when replacing ribbon or clearing
		a paper jam.

* The following graphics are engraved on the casing.

Continuous forms

Single sheets

2-9