| Using |
|
|
MACRO 1 and |
|
MACRO 2 Options Values | Description |
|
|
Continued | CR=LF+CR: A line feed is added to each carriage |
| return. |
| LF=LF: No carriage return is added to a line feed. |
| LF=LF+CR: A carriage return is added to each line |
| feed. |
|
|
<PAPER SRC> | Specify the paper input source. This setting is valid |
(Paper Source) | immediately after powering on. After that, the paper |
| source follows the setting of the paper select lever. |
TRACTOR | Continuous forms selected |
MANUAL | Single sheets selected |
RSVD 1 | Reserved |
RSVD 2 | Reserved |
RSVD 1/2 | Reserved |
|
|
<PRINT DIR> UNIDIR | Unidirectional printing. Unidirectional printing is |
(Print Direction) | used for printing that needs precise vertical |
| alignment. Unidirectional printing is slower than |
| bidirectional printing. |
BIDIR | Bidirectional printing. The printer prints in either |
| direction while seeking the next print direction for a |
| shorter print time. The unidirectional command is |
| ignored. |
SOFT CNTRL
(Software Con- trol)
The print direction follows a command from the computer. If no command is sent, print direction is bidirectional.