Genicom LA36 manual How Set-Up Works, Entering the Set-Up Mode

Using Set-Up Mode

How Set-Up Works

The Set-Up mode consists of Set-Up functions which correspond to the printer settings described in the previous page. Each function generally has many options which correspond to the print features to be changed. Each option includes many parameters values to be selected. All the Set-Up functions, options, and values are printed in a logical sequence on the paper when you enter the Set-Up mode, including the usage of buttons. You can perform all the Set-Up operations by using buttons on the control panel in the following order:

–Navigating through the option menu structure.

–Selecting a new value for an option.

–Saving your new printer configuration (permanently or temporarily).

For information on using the printing test and hex dump functions, see the section, “Using the Diagnostic Functions,” later in this chapter.

Entering the Set-Up Mode

Before entering the Set-Up mode, load continuous feed paper on the tractors as described in the section, “Using Continuous Forms,” in Chapter 2. Several sheets of paper may be required to make all of your Set-Up mode selections. Of course, you can use single sheets.

Note: We recommend the use of the push-tractor mode in order to avoid paper jams.

To enter the Set-Up mode:

1.Make sure that the tractors are loaded with continuous feedpaper and that the paper select lever is set backward.

4-2