AdjustingTop-of-Form Origin

Using Set-Up Mode

Print positions often change gradually when you use the printer over long periods of time. The ADJUST function allows you to adjust these positions by fine-tuning the Top-of-Form origin.

The following table describes the ADJUST options and values. Options are listed in the order they are printed.

ADJUST Options and Values

Overprinted values are the factory settings.

A D J U S T

 

 

Options

Values

Description

<FNFOLD ADJ> (Fanfold

Adjustment)

###/60 IN

Adjust the Top-of-Form origin for continuous forms in increments of 1/60 inch (0.42 mm) from the physical top of the page.

-10 to 10 (0)

Number of 1/60 inches

<MNUAL ADJ> (Manual

Adjustment)

###/60 IN

Adjust the Top-of-Form origin for single sheets in increments of 1/60 inch (0.42 mm) from the physical top of the page.

-10 to 10 (0)

Number of 1/60 inches

<RESVD

1>

Reserved

 

 

 

<RESVD

2>

Reserved

 

 

 

4-29

Page 86
Image 86
Genicom LA36 manual AdjustingTop-of-Form Origin, Adjust Options and Values