Genicom LA36 manual Wrap, No Discon, 1 and, Options, Values Description

Using Set-Up Mode

MACRO	1 and
MACRO	2 Options	Values Description
=DEC DEFLTS=========		The following are the Set-Up options for the DEC
(DEC Defaults)		PPL2 protocol only.
<DEC PRT ID>		Specify the printer ID to be given in response to DA
(DEC Printer ID)		commands from the computer.
	LA50 ID
	LA120 ID
	LA210 ID
<AUTO WRAP> TRUNCATE		Characters are received but not stored in the print
		buffer.

WRAP	End-of-line wrap. Causes a Carriage Return plus a
	Line Feed.

<EOT DISCON>		Specify whether the DSR signal is controlled by the
		EOT character (DEC-423 serial interface only).
(End of Transmis-	NO DISCON	EOT character is ignored.
sion Disconnect)	DISCONNECT	DTR signal turns low for five seconds when the EOT
		character is detected.
<INIT REPRT>		Specify whether the status is sent to the computer
		when the printer is turned on (DEC-423 serial
(Initialization		interface only).
Report)	NO	Status is not sent.
	YES	Status is sent.
<AUTO ANSBK>		Specify whether the ANSWERBACK message is sent
		to the computer when printer is turned on.
(Automatic	NO	ANSWERBACK message is not sent.
ANSWERBACK)	YES	ANSWERBACK message is sent.
<ANSWER ENQ>		Specify whether the ANSWERBACK message is sent
		to the computer when printer receives an ENQ code.
(ANSWERBACK	NO	ANSWERBACK message is not sent.
on ENQ)	YES	ANSWERBACK message is sent.

4-20