Genicom LA36 manual Changing Menu Access Options, Exiting and Saving, All Func, operation

Using Set-Up Mode

Changing Menu Access Options

You can restrict the access to the Set-Up functions to avoid accidentally changing the Set- Up options.

MENU ACCESS Option and Values

•Overprinted values are the factory settings.

MENU ACCESS
Option	Values	Description
<MENU-ACCES>		Specify the type of access to the Set-Up functions
		from the control panel or from the <FUNCTIONS>
		menu.
	ALL FUNC	All functions are accessible.
	MACRO ONLY	Only MACRO 1 and MACRO 2 functions are
		accessible from the <FUNCTIONS> menu.
	NO ACCESS	Set-Up mode is inaccessible.
	NO PANEL	Font, Macro, and Protocol buttons are disabled even in
		Normal mode. Set-Up mode is also inaccessible.
		Note:
		You can return to the All Functions Accessible
		mode by turning the printer on while pressing the
		Park, LF, and FF/Load buttons at the same time.
		The printer enters the Set-Up mode with this
		operation.

Exiting and Saving

This section describes how to exit the Set-Up mode while saving any changes you have made.

To exit the Set-Up mode with the settings saved, first select the SAVE&EXIT function and

then press the button or the button.

Any settings changed while in the Set-Up mode are saved as the new power-on defaults for the printer. The new defaults remain active until you change them again.

4-30