Genicom LA36 manual Overview of the Set-Up Mode, Set-Up Mode Functions

Using Set-Up Mode

Overview of the Set-Up Mode

When you enter the Set-Up mode, the following <FUNCTIONS> menu is printed:

<FUNCTIONS>

MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-ACCESS SAVE&EXIT

The following table summarizes the purpose of each function.

Set-Up Mode Functions

Function	Purpose
MACRO 1 and MACRO 2	Assigns print features to MACRO 1 and MACRO 2
PRINT	Prints the Printer Configuration
INSTALL	Changes the Set-Up menu language, computer interface, and
	paper feed control options
ADJUST	Changes the top-of-form fine adjustment options
TESTS	Runs the printing test and hex dumps
RCALL-FACT	Resets factory settings in MACRO 1, MACRO 2, INSTALL,
	and ADJUST
MENU-ACCESS	Restricts access to Set-Up functions from the control panel
SAVE&EXIT	Exits the Set-Up mode and saves any changes made in the
	Set-Up mode

To select a function from the <FUNCTIONS> menu:

1.Repeatedly press the button or the button to position the red cursor on the plastic print guide under the function you require.

2.Press the button or the button to select the function. If the function has options and values, the printer prints the first option and its values. The MACRO 1, MACRO 2,

INSTALL, ADJUST, TESTS, and MENU-ACCESSfunctions contain options that have selectable values. The other functions have neither options nor values.

4-5