Gentran:Server for Windows User’s Guide Gentran:Server for Windows November 2005
Using Archive and Restore Viewing Restored Interchanges
10 - 51

Viewing Restored Interchanges

Procedure To view restored interchanges, complete the following steps:
Step Action
1From the appropriate area of The Desk, select Restored
Interchanges.
System response
The system displays the Restored Interchanges Browser.
Note
To refresh the display of the Interchanges browser, right-click the
middle pane and select Refresh from the shortcut menu (or press F5).
2Do you want to filter the display of interchanges by status?
If yes, see Filtering the Display of Restored Interchanges on
page 10 - 53.
If no, continue with step 3.
Note
The Filter function enables you to filter the display of restored
interchanges by date, partner, and direction (inbound and outbound).
3Select an interchange.
4Use the following table to determine your next step.
IF you want to... THEN select...
view the content of a
single selected
interchange in raw EDI
data format,
Restored Interchanges from the
View menu, and then
select Gentran Data from the
submenu.
Note
When viewing raw-EDI or external data,
you can switch from Text to Hex format
by selecting the appropriate command
from the View menu.
(Continued on next page)