HP 8100C manual Choose a destination

Note

Note

Step 2 Choose a destination 25

4Repeat steps 2 and 3 to add more fax destinations.

To view the list, press TAB and use the and keys to scroll the destinations. To remove a destination, select it and press BACKSPACE.

5The Paper Size and Format settings appear in the upper right corner of the display. To change these settings, see “ Changing settings (optional)” on page 28 .

6Press to begin sending the document.

●If you sent a single-sided document using the ADF, the process is finished.

●If you sent a double-sided document using the ADF, wait for

the first side to finish. Then, reload the document with the

second side facing up, last page on top, and press again.

●If you used the glass, remove the page when it is finished.

Then, place the next page face down on the glass and press

. After the last page, press SEND (F4).

If fax destinations are busy, the numbers are retried as many times as the Internet fax service specifies.

The digital sender does not notify you if you sent to an invalid fax destination.