Chapter 1

Order supplies

Start HP Photosmart Premier software

After you have installed the HP Photosmart printer software on a computer, open and explore the HP Solution Center.

Windows: Right-click the HP Digital Imaging Monitor icon on the Windows taskbar, and then click Launch/Show HP Solution Center.

Note In this user guide, printer software refers to the HP Photosmart software that comes on the CD with the printer. The printer driver is the part of the printer software which controls the printer.

Printer parts

Front of printer

1Printer screen: Check the ink levels and see print or error messages here.

2Control panel: Use these buttons to open and navigate the printer menu, cancel print jobs, and respond to prompts on the printer screen.

3Top door: Lift to gain access to the printheads and to clear paper jams.

4Specialty media tray (closed): Lower to insert a single sheet of rigid or thick media, such as card stock. Place the media with the side to be printed facing up in this tray. Do not load media thicker than 1.5 mm, or more than one sheet at a time.

5Ink cartridge door: Press the raised bumps at the top of the door to open the door and insert or remove ink cartridges.

6On button: Press to turn on the printer. Flashes blue if the printer is busy.

7Output tray: Print jobs come out here. For easier access to the main tray, you can remove the output tray by sliding it towards you.

8Main tray: Place a stack of plain paper or photo paper in this tray for printing. Place the media into this tray with the side to be printed facing down.

4

HP Photosmart Pro B9100 series printer

Page 7
Image 7
HP B9100 manual Printer parts, Front of printer