Carriage jam
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Clear the paper jam from the rear door
•Solution 2: Clear the paper jam from the front
•Solution 3: Make sure the print carriage can move freely
•Solution 4: Verify that the product is properly connected to a power source
•Solution 5: Print a
•Solution 6: Reset the product
•Solution 7: Contact HP support for service
Solution 1: Clear the paper jam from the rear door
Solution: Clear the paper jam from the rear door. For more information, see:
“Clear paper jams” on page 131 Cause: The product had a paper jam.
If this did not solve the issue, try the next solution.
Solution 2: Clear the paper jam from the front
Solution: Turn off the product and open the print cartridge door to access the print carriage area. Gently remove any paper that is stuck between the rollers, and then turn on the product again.
Troubleshooting
If this did not solve the issue, try the next solution.
Cause: Paper was stuck in the front rollers.
If this did not solve the issue, try the next solution.
Errors 183