4Finish setting up the HP All-in- One

After you have completed the steps in your Start Here guide, refer to this section to help you finish setting up the HP All-in-One. This section contains important setup-related information for your product.

This section contains the following topics:

•Set your preferences

•Connect to a computer

•Connect to a Bluetooth® device

Finish setup

Set your preferences

Before you begin using your product, you should review and, if necessary, adjust the general settings described in this section.

This section contains the following topics:

•Set your language and country/region

•Set the default paper tray for PictBridge/DPOF/UPnP printing

•Enable faster browsing of photos

•Set the energy save mode

•Set the paper tray for printing from a Bluetooth device

•Restore the factory defaults

•Play a slideshow on the display

Set your language and country/region

The language setting determines which language the HP All-in-One uses to show messages on the display. The country/region setting determines the default paper sizes and layouts for printing. You can change these settings at any time by using the following procedure.

To set your language and country/region

1.Press Setup.

2.Press the down arrow button to highlight Preferences, and then press OK.

3.Press the down arrow button to highlight Set Language, and then press OK.

4.Press the down arrow button to scroll through the languages. When the language you want to use is highlighted, press OK.

Set your preferences

19