•“Reverse an image for iron-on transfers” on page 66

•“Print a group of addresses on labels or envelopes” on page 67

Load a CD/DVD

In addition to printing on paper, the HP All-in-One enables you to print directly on the surface of specially coated CDs and DVDs for print jobs started from a connected computer. You can design and create a custom label for your CD or DVD using the software that came with the HP All-in-One. You can then print the label on your printable CD or DVD media.

TIP: It is recommended that you write your data to the CD or DVD before printing the label on it.

NOTE: The HP All-in-One does not support a CD/DVD print job started from the control panel. You must use the software that came with the HP All-in-One to print on a CD/DVD. For more information, see the software help.

To load a regular-size (120 mm) CD/DVD on the CD/DVD tray

1.If the product is placed close to a wall, move it at least 7.5 cm (3 inches) away from the wall.

2.Carefully remove the CD/DVD holder from the storage area below the main paper tray.

3.Securely snap the inkjet printable media onto the CD/DVD holder with the printable side up.

NOTE: The CD/DVD should be placed on the ring at the end of the holder with the arrows.

Load originals and load paper

Load a CD/DVD

45