Chapter 6

6.Lower the output tray.

Related topics

“Print a group of addresses on labels or envelopes” on page 67

Load other types of paper

The following types of paper are designed for special projects. Create your project in the HP Photosmart Software or another application, set the paper type and size, and then print.

originals Load load and paper

HP Premium Inkjet Transparency Film

▲Insert the film so that the white transparency strip (with arrows and the HP logo) is on top and is going into the input tray first.

NOTE: The HP All-in-One cannot automatically detect the paper type. For best results, set the paper type to transparency film in the software before printing onto transparency film.

HP Iron-On Transfers

1.Flatten the transfer sheet completely before using it; do not load curled sheets.

TIP: To prevent curling, keep transfer sheets sealed in the original package until you are ready to use them.

2.Locate the blue stripe on the nonprinting side of the transfer paper and then manually feed one sheet at a time into the input tray with the blue stripe facing up.

HP Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards

▲Insert a small stack of HP greeting card paper into the input tray with the print side down; slide the stack of cards forward until it stops.

TIP: Make sure the area on which you want to print is inserted first, print side down in the input tray.

44 Load originals and load paper