To clean the lid backing

1.Turn off the HP All-in-One, unplug the power cord, and raise the lid.

2.Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.

Wash the backing gently to loosen debris. Do not scrub the backing.

3.Dry the backing with a dry, soft, lint-free cloth.

Caution Do not use paper-based wipes, as these might scratch the backing.

4.If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol.

Caution Be careful not to spill alcohol on the glass or exterior of the HP All- in-One, as this might damage the device.

5.Plug in the power cord, and then turn on the HP All-in-One.

Clean the exterior

Use a soft cloth or slightly moistened sponge to wipe dust, smudges, and stains off the case. The interior of the HP All-in-One does not require cleaning. Keep fluids away from the control panel and the interior of the HP All-in-One.

Caution To avoid damage to the exterior of the HP All-in-One, do not use alcohol or alcohol-based cleaning products.

Use the HP All-in-One features

Basics Guide

73

Page 76
Image 76
HP C7100 manual Clean the exterior, To clean the lid backing