3.Press to highlight Original Type.

4.Press to highlight one of the following options, and then press OK:

If you want the HP All-in-One to automatically determine whether slides or film are loaded in the Slide and Negative Film holder, select Automatic.

If you have color negative film loaded in the Slide and Negative Film holder, select Color Negatives.

If you have slides loaded in the Slide and Negative Film holder, select Slides.

If you have black and white negative film loaded in the Slide and Negative Film holder, select B/W Negatives.

Note The Original Type setting reverts to Automatic after the scan is completed.

Print 10 x 15 cm (4 x 6 inch) photos

You can select specific photos on your memory card or storage device to print as 10 x 15 cm (4 x 6 inch) photos.

To print one or more 10 x 15 cm (4 x 6 inch) photos

1.Insert a memory card into the appropriate slot on the HP All-in-One, or connect a storage device to the front USB port.

Turn the memory card so that the label faces left and the contacts are facing the HP All-in-One, and then push the card forward into the appropriate slot until the Photo light turns on.

The HP All-in-One supports the memory cards described below. Each type of memory card can only be inserted in the appropriate slot for that card.

Top left: CompactFlash (I, II)

Top right: Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card

features One-in-All HP the Use

Basics Guide

65