Bluetooth settings

The following table describes the Bluetooth settings shown on the network configuration page.

Parameter

Device

Address

Device Name

Passkey

Visibility

Security

Description

The hardware address of the Bluetooth device.

The device name assigned to the printer, which can identify it on a Bluetooth device.

A value that the user must enter in order to print via Bluetooth.

Shows whether or not the HP All-in-One is visible to Bluetooth devices that are within range.

Visible to all: Any Bluetooth device within range can print to the HP All-in-One.

Not visible: Only Bluetooth devices that have stored the device address of the HP All-in-One can print to it.

The level of security set for an HP All-in-One connected by Bluetooth.

Low: The HP All-in-One does not require a passkey. Any Bluetooth device within range can print to it.

High: The HP All-in-One requires a passkey from the Bluetooth device before allowing the device to send a print job.

Network setup

Basics Guide

33

Page 36
Image 36
HP C7100 manual Bluetooth settings