hp officejet d series

load paper

Following is the basic procedure for loading paper. There are specific considerations for loading certain types of paper, transparency film, and envelopes. After you review this procedure, see tips for loading other types of paper in the main tray on page 20 and load envelopes on page 19.

For best results, adjust the paper settings each time you change paper types or paper sizes. For more information, see choose the paper tray and set the paper type on page 22.

If you have the HP 250-sheet plain paper tray, you can load paper into both the main paper tray and the 250-sheet plain paper tray. If you have the 250-sheet plain paper tray, you should use it for plain paper only. Please refer to the Accessories guide that comes with the paper tray for information about installing the tray, loading paper, and adjusting paper-width and paper-length guides.

Caution! You must also have the two-sided printing accessory installed to use the 250-sheet plain paper tray.

to load the main paper tray

1Lift the output tray up until it catches in the raised position, and slide the paper-width and paper-length guides to their outermost positions.

load paper

17

Page 23
Image 23
HP d145, d155xi, d135xi manual Load paper