hp officejet d series

choose the paper tray and set the paper type

If you want to use a different type of paper, such as photo paper, transparency film, banner paper, or envelopes, simply load that paper in the main tray. You should then change the paper type settings to ensure the best print quality.

If you have installed HP 250-sheet plain paper tray, that paper tray is the default paper tray that is used for copying. If you load a different type of paper in the main paper tray, you need to not only change the paper type settings, but also specify the paper tray to use.

Caution! You must also have the two-sided printing accessory installed to use the 250-sheet plain paper tray.

You can change copy settings from the front panel or from the HP Director. When you change settings using the front panel, the copy settings are reset two minutes after the unit completes the copy.

HP recommends paper type settings according to the type of paper you’re using. For more information, see recommended paper-type settings for copying in the onscreen User’s Guide.

1Press Tray Select/Paper Type.

If you have both paper trays, press Tray Select/Paper Type until the desired paper tray is selected, indicated by the dot on the left.

2When copying from the main tray, press until the appropriate paper type appears.

3Press Enter to choose the displayed paper type.

set the paper size

For more information, see adjust paper settings for printing in the onscreen User’s Guide.

1Press Menu.

2Press 1, then press 2.

This selects Copy Setup, then selects Paper Size.

3 Press until the desired size appears, then press Enter to select it.

learn more

See the load section in the onscreen User’s Guide to learn more about the following:

Recommended paper-type settings for printing

Recommended paper-type settings for copying

22

load originals and load paper

Page 28
Image 28
HP d135xi, d155xi, d145 manual Choose the paper tray and set the paper type, Set the paper size, Learn more