HP Email Firewall Appliance manual Reboot, Shutdown, Reset to Factory, Settings

Reboot and Shutdown 113

Reboot and	The 3Com Email Firewall can be safely rebooted or shut down from the
Shutdown	System Mgmt -> Reboot and Shutdown screen. Before shutting down,
	remove any media from the floppy and CDROM drives.

	Click Reboot now to shutdown the system and reboot.
	Click Shutdown now to shutdown the system completely.
Reset to Factory	Select System Mgmt -> Reset to Factory Settings from the menu to revert
Settings	your 3Com Email Firewall back to its factory default settings.
	CAUTION: All existing configuration settings and data will be lost if you
	reset to factory default settings. Ensure that you perform a backup of
	your system if you wish to restore your configuration and data. Also
	ensure that your system is connected to a UPS (Uninterruptable Power
	Supply) to prevent damage in the event of a power failure duing this
	procedure.

Click the Restore to Factory Settings now button to continue. The system must be rebooted when the procedure is complete. After rebooting, you must reinstall the system using the instructions in the Installation Guide that came with your 3Com Email Firewall.