Chapter 2

Installation and Wiring

This chapter covers installation and wiring for the ENI. It is divided into the following sections:

•European Communities (EC) Directive Compliance

•Safety Considerations

•Mounting

•External Power Supply Wiring

•ENI Port Identification

•Ethernet Connections

•RS-232 Port Connections

This product has the CE mark. It is approved for installation within the European Union and EEA regions. It has been designed and tested to meet the following directives.

EMC Directive

This product is tested to meet the Council Directive 89/336/EC Electromagnetic Compatibility (EMC) by applying the following standards, in whole or in part, documented in a technical construction file:

•EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial Environment

•EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low Voltage, by applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 - Equipment Requirements and

Publication 1761-UM006A-EN-P - February 2001