6-6E-Mail Messages (Node 50 to 99)

2.Open the message instruction and enter the appropriate variables. The variables are described in Table 6.1.

Table 6.1 Message Instruction Variables for Sending an E-Mail Message

Variable

Setting

 

 

 

 

This Controller Parameters:

 

 

 

 

Communication Command

Use any command supported by your controller.

 

 

 

 

Data Table Address

Any valid string, such as ST25:21 as shown below.

 

 

 

 

Size in Elements

1

 

 

 

 

 

Channel

The RS-232 communication channel that is connected to the

 

 

ENI, typically 0 or 1.

 

 

 

 

Target Device Parameters:

 

 

 

 

Message Timeout

Leave this value at the default.

 

 

 

 

Data Table Offset

Always 0.

 

 

 

 

Local Node Addr (dec).

This is the destination node address. Nodes 50 to 99 send

 

 

e-mail messages.

 

 

 

 

Local/Remote

Always Local.

 

 

 

 

 

 

 

 

 

 

 

 

Publication 1761-UM006A-EN-P - February 2001