Product Overview | |
|
|
Default Settings
The ENI’s RS-232 port has the following default settings:
Table 1.1 RS-232 Settings
Setting | Default | Other Options | |
|
|
| |
Baud Rate | Autobaud | see table 4.7 | |
|
|
| |
Handshaking (hardware, software) | none | none | |
|
|
|
|
Data Bits | 8 |
| none |
|
|
|
|
Stop Bits | 1 |
| none |
|
|
| |
Parity | none | none | |
|
|
|
|
Table 1.2 DF1 Settings |
|
|
|
|
|
| |
Setting | Default | Other Options | |
|
|
| |
Duplicate Message Detection | Enable | none | |
|
|
| |
Error Detection | CRC, BCC | ||
|
|
| Autobaud is true, |
|
|
| otherwise CRC |
|
|
| |
Embedded Response Operation | none | ||
| reception only(1) |
| |
DLE ACK Timeout | 1 second | none | |
|
|
|
|
DLE NAK Receive | 3 | NAK retries | none |
|
|
|
|
DLE ENQ for Response | 3 | ENQs retries | none |
|
|
| |
DF1 Node Address | Don’t Care |
| |
|
|
|
|
(1) The ENI receives NAKs and ACKs, but does not generate them.
Publication