HP MicroLogix 1761-NET-ENI manual Sending an E-Mail Message

E-Mail Messages (Node 50 to 99) 6-5

Sending an E-Mail Message

The ENI uses a pair of node addresses to send e-mail or data messages over TCP/IP. To send e-mail, two sets of addresses are used as illustrated in the table below. Node numbers 150 to 199 are used to define or store the actual e-mail address, and nodes 50 to 99 are used to send the string element to the e-mail recipient.

TIP

The procedure to send configuration strings (nodes 150 to 199), or message strings (nodes 50 to 99) is exactly the same as discussed, “Configuring ENI String Parameters” on page 4-8.

1.Start by configuring a MSG instruction.

Publication 1761-UM006A-EN-P - February 2001