Memory

Basic Screening

To use basic screening (or halftoning), do the following:

At the Printer

nIn the Administration/Emulations/PostScript/Halftone Type menu select Basic.

nIn the Administration/Emulations/PostScript/Gamma Correction menu select Yes.

In Your QuarkXPress Document (Page Setup Dialog Box)

nIn the Printer Type listbox select 1660 Basic Screening PDF.

nIf you have EFIcolor software loaded, select None.

nSet the Halftone Screen (lpi) to the lpi of your choice.

nDeselect Use PDF Screen Values.

Memory

Memory allows your printer to store and retrieve information that’s required to perform many of its tasks. The memory requirements of each printer are dictated by the applications to be run. Each printer comes standard with a certain amount of memory, but you may add more memory as necessary.

The memory is divided among users (or “clients”), each of which allocated a specific amount (or “block”) of memory. Each memory client is dedicated to a specific printing and application purpose. Your QMS 1660E Print System allows you to distribute its memory among the various memory clients where it can best serve your specific printing needs. The following sections provide information on memory management so you can get the most from your printer.

Generally, there are two main reasons for wanting to reconfigure your printer’s memory:

nTo achieve maximum performance

Additional Technical Information

5-9