HP QMS 1660E manual 53

Emulations

Notes	When set to off, this option maps pen colors as follows:
	Pen 0=White, Pen 1=Black, Pen 2=Red, Pen 3=Green, Pen
	4=Yellow, Pen 5=Blue, Pen 6=Magenta, Pen 7=Cyan.
	When set to on, this option tells the printer to map each pen to
	its assigned color, then convert the color to a grayscale using
	the National Television System Committee (NTSC) color
	standard for luminosity coefficients (Additive System):
	Y = 0.30R + 0.59G + 0.11B
	Example of how to use the color standard formula:
	WhiteY = [1*0.30) + (1*0.59) + (1*0.11)]—100% gray
	BlackY = [0*0.30) + (0*0.59) + (0*0.11)]—0% gray
	RedY = [1*0.30) + (0*0.59) + (0*0.11)]—30% gray
	GreenY = [0*0.30) + (1*0.59) + (0*0.11)]—59% gray
	YellowY = [1*0.30) + (1*0.59) + (0*0.11)]—89% gray
	BlueY = [0*0.30) + (0*0.59) + (1*0.11)]—11% gray
	MagentaY = [1*0.30) + (0*0.59) + (1*0.11)]—41% gray
	CyanY = [0*0.30) + (1*0.59) + (1*0.11)]—70% gray

Point Size x100

Identifies the point size for scalable fonts in 0.25 point increments.

Menu	Administration/Emulations/PCL 5/Point Size x100
Choices	00025-99975 (0.25-999.75 points)
Default	01200 (12 points)
Notes	If the font is not scalable or if a bitmap font is specified, this
	setting is ignored.

Retain Temporary Fonts and Macros

Allows you to choose whether to retain temporary HP PCL5 fonts and macros at the end of each print job.

Menu Administration/Emulations/HP PCL 5/Retain Temporary

Printer Configuration 4-21