HP QMS 1660E Notes, Range, Syntax, Format, Purpose, Purpose, Default, Purpose, Variable font name, %%IncludeFeature:font (font name)

Updated DOC

Commands

Select Font Command

Syntax %%IncludeFeature:font (font name)

Purpose Specifies the default font to use.

Notes Fonts are identified by the names shown above. Only the resident fonts may be selected (the available set varies from printer to printer). An asterisk “*” in the name indicates that a font is scalable, and that a point size is to be applied. The value selectbyid indicates that the default font ID or unique font index will be used for default font selection. Selecting a bound, bitmap font overrides the default settings for symbol set and point size. An unbound font uses the specified default symbol set if possible, while a scalable font uses the default font size.

Variable font name
	Purpose	Specifies the default font name.
	Range	courier12	times*blditalic
		courier12bold	univ*
		courier12italic	univ*italic
		courier10	univ*bold
		courier10bold	univ*blditalic
		courier10italic	univcond*
		lineprinter	univcond*italic
		times*	univcond*bold
		times*italic	univcond*blditlc
		times*bold	selectbyindex
	Default	Depends on printer configuration
	Format	Character

Select Font Index Command

Syntax %%IncludeFeature:fontid (index #)

Purpose Specifies the default font index number.

C-14 QMS 1660E Print System Reference