HP-GL Color

Encoding

Since your QMS 1660E Print System is a monochrome (black and white) printer, the pen colors are converted to shades of gray. The default color mappings for the 8 pens are as follows:

Pen

Pen Color

Level of Gray

 

 

 

1

Black

100%

2

Black

100%

3

Red

70%

4

Green

41%

5

Blue

89%

6

Violet

59%

7

Orange

25.8%

8

Brown

50%

 

 

 

»Note: The default color for both pen 1 and pen 2 is black. However, the pen width for these two pens is different. Pen 1 is 0.7 mm and pen 2 is 0.3 mm.

The printer maps each pen to its assigned color, then converts the color to a grayscale using the National Television System Committee (NTSC) standard equation for encoding color. This equation converts a given set of CMYK values to grayscale. For the 8 pen colors assigned to pens 1 - 8, the printer uses the designated grayscale; for any other pen color, the printer uses the following equation:

[(C*0.3) + (M*0.59) + (Y*0.11) + K] ÷ 255

»Note: This equation assumes that each grayscale is a byte value that ranges from 0 to 255 (100%). If the sum of the left-side (calculation in brackets) of the NTSC equation is greater than 255, then the sum is set equal to 255.

Additional Technical Information

5-35