Printer Start-Up

Options

monitors, and printers and the reduction of air pollution caused by power generation.

»Note: The addition of some optional interfaces, in some combinations, may cause the product to become non-compliant.

The Energy Saver option specifies whether the printer changes to a low-power state (the engine remains on, but the fuser turns off) after a specified period of inactivity. When a print job is received, the printer begins processing it in the background and returns to normal power within 90 seconds.

Menu

Administration/Engine/Energy Saver

 

 

Choices

15 Min—Use lower power after 15 minutes of inactivity.

 

30 Min—Use lower power after 30 minutes of inactivity.

 

1

Hour—Use lower power after 1 hour of inactivity.

 

2

Hours—Use lower power after 2 hours of inactivity.

 

3

Hours—Use lower power after 3 hours of inactivity.

 

Off—Use normal power all of the time.

 

 

Default

1 Hour

 

 

 

Printer Start-Up Options

The Administration/Startup Options menu allows you to configure your printer to run certain options automatically when you turn it on.

Enabling/Disabling the Start-Up Page

By default, the printer prints a start-up page when you turn it on. The start-up page lists basic information about the printer, such as its name, the PostScript emulation level and version, and various printer settings. However, you can turn the start-up page off to conserve paper and toner.

Menu

Administration/Startup Options/Do Start Page

 

 

Printer Configuration

4-59